turbo output at altitude

turbo output at altitude

Postby Bryan Devault » Sun Sep 07, 2008 3:28 pm

I test flew my Turbo twin comanche last night after a lot of work to get the turbo boost higher, which included replacing the wastegates, sealing the alternate air boxes and air filters, and replacing the left cable, and the right turbo now makes 25" of boost at 2700 rpm at 17500' (20000' density altitude on a hot Houston summer day). Pulling back the prop to 2500 rpm gives only about 23" of boost. Is this about all I can expect with everything working, or should I keep looking or air leaks? The right turbo was rebuilt right before I bought the aircraft in May, so I don't think that's the issue.

The new cable on the left engine doesn't seem strong enough to close the wastegate, since there's about a 2-3" boost differential between the left and right engines and the cable feels sticky and tentative. Does anyone have any ideas? We had no luck finding replacement for the original cable so the new one was fabricated for us.
Bryan Devault
ICS member
ICS member
 
Posts: 3
Joined: Sun Sep 07, 2008 2:57 pm

Postby Jay » Sun Sep 07, 2008 6:39 pm

23" of MP at 2500 RPM is about as good as I've ever been able to do at a DA of 20,000!

Could it be that your left wastegate is hanging up a bit? Perhaps as the metal gets hot and expands the fit is too tight. There is an article in the Tips Special about lapping the wastegates so that they close smoothly. That's just a thought, certainly not definitive!

Best,

Jay
Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Postby CLIPCLIP » Mon Sep 08, 2008 12:57 pm

CLIPCLIP
ICS member
ICS member
 
Posts: 97
Joined: Thu Dec 23, 1999 2:06 am
Location: Montreal, Quebec, Canada

Postby Tony Scarpelli » Wed Oct 15, 2008 5:01 pm

I have two new Turbos and 2 year old waste gates, rebuilt air box induction system and the highest I am able to get is 28.8" at 14k'

So that would be about 22.8" at 20k'

I have not had it above 14k and it may not be linear.

I am still looking for anything that can give me more boost as I have talked to someone with a 260TC and he says that he can get 29" at 20,000' without fully engaging the wastegates. So he has boost to go.

He has 200 hrs on a fwf oh.
Tony Scarpelli
ICS member
ICS member
 
Posts: 111
Joined: Thu May 08, 2008 11:47 am

turbo boost

Postby Bryan Devault » Sat Nov 01, 2008 11:46 pm

Bryan Devault
ICS member
ICS member
 
Posts: 3
Joined: Sun Sep 07, 2008 2:57 pm

Postby T210DRVR » Sun Jan 25, 2009 3:08 am

User avatar
T210DRVR
ICS member
ICS member
 
Posts: 117
Joined: Sat May 03, 2008 4:31 am
Location: So. Oregon

Postby Zach Grant L1011jock » Sun Jan 25, 2009 3:44 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby KJB » Fri Jan 30, 2009 11:08 pm

KJB
ICS member
ICS member
 
Posts: 21
Joined: Sat Jun 07, 2008 9:28 pm
Location: Alicante/Spain

Postby Zach Grant L1011jock » Sat Jan 31, 2009 3:50 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE


Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 36 guests

cron