by Ed Asmus » Mon Feb 09, 2015 6:54 pm
Hi William,
I second what Kristin has to say. I fly a 1959 250 with the tip tanks. If you're planning a flight with fuel in the tips, after you reach cruise altitude, use the tips first. If you have a problem, you'll have lots of altitude underneath you to get back on the main tank with plenty of fuel in it (them). Then you'll have plenty of time to figure out what you want to do about it. Whenever I switch tanks, I am very alert for signs of trouble for several minutes after the switch. Once I've reached the 4 to 5 minute mark after the switch with no sign of trouble, my confidence in the selected tank is very good! Prior to that time frame, I'm on "high alert."
My personal technique is to not take off until the engine has been running on my selected main tank, including the run-up, for at least 5 minutes, preferably a little more. If you switch tanks on your way to the runway or at the run up area, I wouldn't take off for at least 5 minutes. I figure if I take off with plenty of fuel in my selected main tank, the other three tanks I'm willing to confirm there integrity at altitude knowing I always have plenty of time left in my first selected main tank if I run into problems with any of the other three tanks.
Hope this helps!
Ed