Alternate Air Cable - engine

Alternate Air Cable - engine

Postby Larry Martin » Sat Sep 10, 2016 5:37 pm

Part two of the question. I don't have time to properly deal with the stuck cable on both alternative airboxes. (annaul done in May - really :evil: ) The spring loaded door works fine. Is it a big deal not to be able to select alternate air? Has anyone been in a situation where they had to pull them open? I will fix them, but would prefer to wait until next month, as we have a trip planned that coul be in jepority.

thanks,
Larry Martin
 
Posts: 38
Joined: Wed Jul 13, 2016 6:51 pm

Re: Alternate Air Cable - engine

Postby Miller D Einsel » Sun Oct 02, 2016 2:48 pm

These cables can freeze from lack of regular use. Mine did because I didn't exercise it enough. Most serious aviation parts suppliers have them. It was replaced during an annual inspection.

Miller 45P
Miller D Einsel
ICS member
ICS member
 
Posts: 12
Joined: Sat Mar 06, 2004 1:10 am

Re: Alternate Air Cable - engine

Postby AlanBreen » Wed Oct 05, 2016 11:55 pm

In my opinion if you need to use the manual alternate air controls you will have had much bigger issues before that. So much so that operating the manual system is probably not even something you'd be caring about at that stage.

I'd recommend having fixed but I'd not be too worried about the consequences of them not working, especially if they still operate automatically. Some aircraft I've flown only have automatic doors.
User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Re: Alternate Air Cable - engine

Postby Larry Martin » Thu Oct 06, 2016 2:54 am

Thanks, I share that opinion.

I did repair them, but it is still too stiff.
larry
Larry Martin
 
Posts: 38
Joined: Wed Jul 13, 2016 6:51 pm

Re: Alternate Air Cable - engine

Postby Miller D Einsel » Fri Oct 07, 2016 3:44 am

I have never had to use the alternate air cable in flight l. During my takeoff check list, I would put my hand on the control but not actually pull it. I now always pull it just to make sure that the cable is regularly exercised during the year not just at annual. But I don't really know that the control is actually working just because the cable moves.

Miller. 45P
Miller D Einsel
ICS member
ICS member
 
Posts: 12
Joined: Sat Mar 06, 2004 1:10 am

Re: Alternate Air Cable - engine

Postby Timothy Poole » Fri Oct 07, 2016 12:58 pm

User avatar
Timothy Poole
 
Posts: 122
Joined: Tue Oct 28, 2014 8:43 pm
Location: KVKX


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 16 guests