 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Baffles
3 posts
• Page 1 of 1
Baffles
by Joshua Dickson » Fri Mar 21, 2014 6:40 pm
I am in need of some new baffles for the PA-24 180 (1959). The guys in Alaska make them for the 250 and 260 but not my little 180. Are they different? Anyone know if there are sheet metal dudes around that can "Repair" them?
- Joshua Dickson
- Posts: 25
- Joined: Wed Mar 06, 2013 5:18 pm
Re: Baffles
by Zach Grant L1011jock » Fri Mar 21, 2014 7:02 pm
Matt Kurke at Comanchegear.com. The front baffles are the tricky ones. Side and rear can be had pretty easily from Vans or any other design using an O360 and pressure cowl. They of course will just be donor pieces for the repair...
Zach
Zach
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
Re: Baffles
by N3322G » Fri Mar 21, 2014 7:47 pm
Joshua,
Ditto what Zach said - Matt does excellent work.
BTW tightly fitted flexible teflon baffles really made a difference to the IO320s in my Twin. If you are doing baffles, might want to add this to the project list - just a thought.
Ditto what Zach said - Matt does excellent work.
BTW tightly fitted flexible teflon baffles really made a difference to the IO320s in my Twin. If you are doing baffles, might want to add this to the project list - just a thought.
Pat
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
-
N3322G - ICS member
- Posts: 1911
- Joined: Thu May 08, 2008 1:58 pm
- Location: Fort Worth, Texas area
3 posts
• Page 1 of 1
Return to Maintenance - Airframe
Who is online
Users browsing this forum: No registered users and 23 guests