by Zach Grant L1011jock » Thu Jul 22, 2010 7:53 pm
The airplane may be bent, it may have an unlevel Turn Coordinator, and or it could be mis rigged. Check to make sure you are actually flying unlevel first by leveling the aircraft as shown in the service manual. After that, if no problem is found, rig the aircraft as per the service manual...follow ALL the instructions from step one through the end, NO SHORT CUTS. If there is still no change, then you have some other issue with the airframe, and you should investigate to see if there is a bent engine mount, bent wing, bent vertical, poorly repaired fuselage after gear up, etc.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"