After much pain and suffering (both in my heart and wallet!) I finally got my banged-up 250 back to Oklahoma. Where I promptly started taking it apart! ('been doing that since I was about 3 I think...)
Anyway, I'm doing a complete firewall-forward refurb, and was wondering something-
Can I rivet stand-offs to the firewall at all the points that I need to connect clamps and fasteners to? After doing the upside down contortionist thing to hold screw-heads on the various through-bolts that so many have installed before me....well... I've decided I don't like that. I know, I should ask my mechanic, but he's out of town...
Hopefully I'm being clear about what it is I'm asking. Let me know if I'm not.
Attached are a few pics of my latest trouble-making... and I will definitely start a "journal" with pics and progress notes here on the ICS forum soon.
Thanks,
Chris
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
firewall stand-offs
7 posts
• Page 1 of 1
firewall stand-offs
by criffus » Fri Feb 27, 2009 4:38 pm
- Attachments
-
- After you get a new engine installed- by-all-means, remove it as soon as you get home!!! (where's my xanex????)
-
- Nice, huh? I actually did all this so that I could put my nose-strut valve cap back on easily... ;-)
- criffus
- ICS member
- Posts: 34
- Joined: Mon Jul 28, 2008 6:07 pm
- Location: Altus, OK - KAXS
by 9089P » Fri Feb 27, 2009 5:18 pm
Hi Chris,
I think I would have gulped a few times before I started that although I would love to clean up my firewall and apply new insulation.
My hanger neighbor Brian bought a pristine Stearman about ten years ago. Another pilot on the field who obviously knew Brian better than I did bet me that Brian would have the engine off within 6 mos. I lost the bet by 5 days.
Good luck, Don
I think I would have gulped a few times before I started that although I would love to clean up my firewall and apply new insulation.
My hanger neighbor Brian bought a pristine Stearman about ten years ago. Another pilot on the field who obviously knew Brian better than I did bet me that Brian would have the engine off within 6 mos. I lost the bet by 5 days.
Good luck, Don
- 9089P
- ICS member
- Posts: 426
- Joined: Wed Jan 07, 2004 7:01 am
by Zach Grant L1011jock » Fri Feb 27, 2009 8:08 pm
Stand offs...or nut plates...I'm confused?
-Zach
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
Rivet stand offs
by 15384 » Sat Feb 28, 2009 9:55 pm
- 15384
- ICS member
- Posts: 115
- Joined: Wed Nov 26, 2003 5:06 pm
by Patrick Arnold » Thu Mar 26, 2009 10:14 pm
- Patrick Arnold
- ICS member
- Posts: 64
- Joined: Tue May 13, 2008 1:51 pm
7 posts
• Page 1 of 1
Return to Maintenance - Airframe
Who is online
Users browsing this forum: No registered users and 19 guests