No hidden issues as I got lucky in that torque tube had no corrosion issues or cracks, all bolts were replaced with new ones.
Total time to remove/replace the horn assembly and button-up the stabilators came to 6.5hrs.
Adolfo
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Stabilator Horn AD
5 posts
• Page 1 of 1
Stabilator Horn AD
by Adolfo Ortiz » Tue Apr 21, 2015 8:17 pm
Just finished replacing the horn assembly and inspecting the associated components on my 250, all went well
No hidden issues as I got lucky in that torque tube had no corrosion issues or cracks, all bolts were replaced with new ones.
Total time to remove/replace the horn assembly and button-up the stabilators came to 6.5hrs.
Adolfo
No hidden issues as I got lucky in that torque tube had no corrosion issues or cracks, all bolts were replaced with new ones.
Total time to remove/replace the horn assembly and button-up the stabilators came to 6.5hrs.
Adolfo
- Adolfo Ortiz
- Posts: 20
- Joined: Tue Oct 14, 2014 4:03 am
Re: Stabilator Horn AD
by Zach Grant L1011jock » Thu Apr 23, 2015 3:30 am
Did you report your findings to the horn survey on the ICS home page? If not, please do as that is the official record for ICS. Thanks!
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
Re: Stabilator Horn AD
by Adolfo Ortiz » Thu Apr 23, 2015 5:16 am
Zach, yes I did, I'll also be sending the original horn to Cliff.
- Adolfo Ortiz
- Posts: 20
- Joined: Tue Oct 14, 2014 4:03 am
Re: Stabilator Horn AD
by Stephen Flaherty » Sun Apr 02, 2017 8:16 pm
I just had the Aussie horn installed. The old horn was normal to visual inspection but no further testing performed. What should I do with the old horn? Is someone still interested in collecting them?
Steve
Steve
- Stephen Flaherty
- ICS member
- Posts: 54
- Joined: Sun Feb 08, 2004 2:58 am
- Location: Fayetteville, NC
Re: Stabilator Horn AD
by Zach Grant L1011jock » Sun Apr 02, 2017 9:09 pm
Steve,
No you can keep the horn as a paperweight etc. Please fill out the survey on the home page with your inspection results of no crack found.
Zach
No you can keep the horn as a paperweight etc. Please fill out the survey on the home page with your inspection results of no crack found.
Zach
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
5 posts
• Page 1 of 1
Return to Maintenance - Airframe
Who is online
Users browsing this forum: No registered users and 8 guests