Stall warning /gear warning flasher

Stall warning /gear warning flasher

Postby David Benjamin » Sun Jun 09, 2013 5:30 pm

Does anyone know the best way to test the flasher and its location on the 180 model/Dave
David Benjamin
 
Posts: 11
Joined: Tue Jun 19, 2012 12:40 am

Re: Stall warning /gear warning flasher

Postby Zach Grant L1011jock » Tue Jun 11, 2013 10:38 pm

There was no flasher installed in the 180 that I am aware of. The gear horn is on the throttle switch and nose gear down limit switch. The stall warning system if installed (not required on the 180) was a simple on off switch light.
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Stall warning /gear warning flasher

Postby David Benjamin » Sun Jun 16, 2013 4:20 pm

To All: It was the micro at the throttle which was out of alignment due to an adjustment at annual when a new carb was installed , all is well. Thanks Dave :mrgreen:
David Benjamin
 
Posts: 11
Joined: Tue Jun 19, 2012 12:40 am


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 10 guests

cron