For the life of me cant find the problem. Just had complete panel install. Only when engine running and you ptt to transmit the 430 fills the headset with static. Static cannot be heard on receiving end. Pulled ALL breakers and no change. Swapped antennae and no change. Any ideas?? Thought I might find something before I take it to the shop. The one that did the work is a state away.
Keith
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
430w transmit static
4 posts
• Page 1 of 1
430w transmit static
by Keith Koenig » Thu Jul 04, 2013 8:47 pm
-
Keith Koenig - Posts: 14
- Joined: Mon Jul 16, 2012 8:50 pm
- Location: Discovery Bay, CA
Re: 430w transmit static
by N3322G » Thu Jul 04, 2013 9:28 pm
Usually grounding but not always.
Pat
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
-
N3322G - ICS member
- Posts: 1911
- Joined: Thu May 08, 2008 1:58 pm
- Location: Fort Worth, Texas area
Re: 430w transmit static
by md11flyer » Fri Jul 05, 2013 1:07 am
Keith is there static when you transmit using your headset and when using your handheld mic? Do you also have it when you transmit on number 2 radio? and from the copliot position? is there static on the cockpit speaker?
The answer to these questions will isolate it to wiring or radio.
Gary
The answer to these questions will isolate it to wiring or radio.
Gary
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm
Re: 430w transmit static
by Keith Koenig » Fri Jul 05, 2013 7:33 pm
Gary, only on the 430 not com2. All headsets either side transmitting. Hmm have not checked if it comes out of the speaker, I will try that. Thanks
Keith
Keith
-
Keith Koenig - Posts: 14
- Joined: Mon Jul 16, 2012 8:50 pm
- Location: Discovery Bay, CA
4 posts
• Page 1 of 1
Return to Maintenance - Avionics
Who is online
Users browsing this forum: No registered users and 4 guests