Century III/Altimatic IIIC

Century III/Altimatic IIIC

Postby Kristin Winter » Tue Dec 18, 2012 5:21 am

Does anyone have a Century III/Altimatic IIIC installed in their twin under the STC? I am looking for a copy of the installation instructions. This is the autopilot with the four rocker switches in the control head. See photo below.
Century III control head.JPG
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Century III/Altimatic IIIC

Postby N3322G » Tue Dec 18, 2012 5:43 pm

It is a long shot but have you tried Century?

The stuff we have has long been stabilized but Ken was able to download all the manuals. Might be worth a try or a call. I saw a III interconnect maunal here. http://www.comancheflyer.com/NS/cff_files/cf_ppp.htm
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Century III/Altimatic IIIC

Postby LakeheadFlyer » Tue Dec 18, 2012 6:13 pm

I have a Century II, IIB, III Service Manual in PDF if you'd like. I don't think it has installation instructions though.
User avatar
LakeheadFlyer
 
Posts: 8
Joined: Tue Jul 24, 2012 5:48 pm
Location: Thunder Bay, Ontario

Re: Century III/Altimatic IIIC

Postby Kristin Winter » Wed Dec 19, 2012 5:07 am

Thanks! I have scrounged what I could find on the internet, but would like the installation instructions so I have approved data to make the installation. I do have the service manuals.

Kristin
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Century III/Altimatic IIIC

Postby Christopher Hufnagel » Fri Dec 21, 2012 6:44 am

Kristin,
I have the same autopilot. I am not sure what manuals exist, but fortunately my airplane has very through records and only three or so owners. (PA30B turbo) I will look tomorrow to see if what you need may be there. I do not specifically remember seeing this information, but it may be there.
Chris
Christopher Hufnagel
 
Posts: 30
Joined: Wed Feb 23, 2011 6:01 am

Re: Century III/Altimatic IIIC

Postby Kristin Winter » Fri Dec 21, 2012 8:51 pm

Chris,

I am keeping my fingers crossed. I am sure that I can get it from Century, but at a couple of AMU's.

Thanks for your help.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Century III/Altimatic IIIC

Postby Christopher Hufnagel » Sun Dec 23, 2012 1:37 am

Kristin,
I don't think I have what you are looking for but would be happy to share anything I do have.
In the AFM I have the Edo-Aire Mitchell flight manual supplement per STC SA727WE.
Unfortunately no instillation instructions.
I also have a copy of the FAA 337 document for this instillation which has a list of the work completed to comply with STC.

Maybe you can find more information via Edo-Aire???

If any of this would be of help, please let me know. I can fax or email it to you.
chufnagel@cybermesa.com

Best of luck,
chris
Christopher Hufnagel
 
Posts: 30
Joined: Wed Feb 23, 2011 6:01 am

Re: Century III/Altimatic IIIC

Postby Christopher Hufnagel » Sun Dec 23, 2012 1:41 am

Kristin,
One last note. The work was completed in 1983 by Southern Avionics & Communication in Mobile AL.
It's a long shot, but I googled them and they are still in business.

chris
Christopher Hufnagel
 
Posts: 30
Joined: Wed Feb 23, 2011 6:01 am

Re: Century III/Altimatic IIIC

Postby Kristin Winter » Sun Dec 23, 2012 5:08 am

Chris,

Thanks so much! I sent you email.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California


Return to Maintenance - Avionics

Who is online

Users browsing this forum: No registered users and 50 guests

cron