by IO720 » Wed Feb 01, 2012 4:33 am
Hi Mark. I've had 2 GTN650's and the G500 installed in my Comanche last spring. Spencer Avionics in Spencer, Iowa did the install. As was said earlier, I, too, enjoy the 650's a lot. The G500 was displaying mph at first because the avionics shop said it was mandatory. I was disappointed, to be sure, but really got frustrated when, on my first flight home, ATC asked "say airspeed", and I couldn't tell them without referring back to my old airspeed indicator. So I called Garmin. I explained to them that my POH (the kind offered by ICS) lists both knots and mph, as well as my original a/s indicator. Garmin told me that switching over to knots on the G500 was just fine. I had them call the avionics shop to verify and the switch to knots was made. Why 2 GTN650's instead of one GTN650 and a GTN750 you might ask? Because I've had a GMX200 displaying WSI weather prior to the upgrade. WSI won't display on any other Garmin products. I've gotten quite accustomed to WSI and enjoy their dependability. So I have one GTN650 feeding the G500 and the other one feeding the GMX200. When on crossfeed, the displays are identical. When crossfeed is off, the two displays will show different flight plans...handy for missed approaches or to go to an alternate. You can see the panel in the "MY Panel" section of Photo Gallery in this website.
Rick Mascari
N64400
- Attachments
-