Wiring diagram for electric trim

Wiring diagram for electric trim

Postby Reinhold Probst » Wed Mar 02, 2011 5:32 am

I had to pull the Navajo yoke mounted mason trim switch from my 1967 twin Comanche 8313y when I had to remove the yoke itself.
Upon removal it turned out that the 45 year old wire insulations have disintegrated and a few soldered connections broke off before we could exactly trace the original wire scheme.
I would need some help in how to rewire the trim and disconnect switch, please.
The installed Autopilot is an Altimatic III.
Reinhold Probst
 
Posts: 2
Joined: Tue Nov 02, 2010 11:13 pm

Re: Wiring diagram for electric trim

Postby Zach Grant L1011jock » Sun Mar 06, 2011 3:06 pm

A quick call to autopilots central or Muncie aviation should hook you up. That wiring is contained in the Altimatic III installation and service instructions.

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE


Return to Maintenance - Avionics

Who is online

Users browsing this forum: No registered users and 44 guests

cron