Hello all,
I have a 260Turbo with a strut that is driving me crazy. The gear had been rebuilt and the struts re-chromed before I bought the airplane. But I have a strut that keeps leaking and I am not sure why. The seal has been replaced twice. The crazy part is that it is inconsistent when it leaks. After the last seal replacement it still seemed to have a slow leak for a while then it stabillized slightly below the normal level. It seemed fine, then over the winter I went a while without flying it and went over to check the airplane. I found a puddle of oil and a flat strut. We pumped up the strut and it seemed to hold. Did a few landings and it perhaps dropped a little but not too bad. Sat in the hangar for a couple of weeks and came back and it was still at the same level. Flew the plane, then since my a/p was there that day decided to pump it up a little more just to have a little extra. Moved it back to the hanger, pushed it in, put my stuff away and before I left I noticed it was way down again! No oil other than the one time, but way down. Trying to decide where to go next with it. Any idea from you experts with more Comanche experience than myself? Thanks!
Ron