Toe Brake Conversion??

Toe Brake Conversion??

Postby Alejandro Cantarini » Tue Jan 08, 2013 1:54 am

i just purchased N5024P one of the oldest Comanches still flying he is a 1958, im looking to do the toe brake conversion any ideas were to start???
Alejandro Cantarini
 
Posts: 41
Joined: Wed Dec 12, 2012 10:07 pm

Re: Toe Brake Conversion??

Postby Kristin Winter » Tue Jan 08, 2013 3:42 am

That is easy! Abandon the idea and save yourself a lot of grief and expense for little to no gain. The handbrake works great, lasts a lot time, is easy to bleed. Use the money you save on a nice upgrade.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Toe Brake Conversion??

Postby Ray B » Tue Jan 08, 2013 6:13 am

I AGREE WITH KRISTIN. I've owned both types, with and without, and the simplicity of the hand brake only system wins out. With direct steering rod nose wheel steering there is not much advantage to having toe brakes. Ray B
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am

Re: Toe Brake Conversion??

Postby Ray B » Tue Jan 08, 2013 6:26 am

How about using the money you save on toe brakes for landing gear system up grades? New limit switches and wiring harness after 54 years would be great. Or maybe new main gear conduits? Alternator? Brakes swapped to inside? Tail AD done yet? New LED beacon? All more satisfying than toe brakes. Ray B.
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am

Re: Toe Brake Conversion??

Postby Alejandro Cantarini » Wed Jan 09, 2013 7:54 pm

I guess would scratch that mod off my list, i just got the tail horn AD done and while the plane was at part i replace the bearings, in our way to Texas i lost the vacuum pump, ceiling was way low to flight with out altimeter dint want to push our look, plane is currently vfr only, the old Narco mk16 is getting replace soon, have found few issues on the plane engine is not reaching 2700 rpms on take off i just get 2500, prop was overhauled few days ago i think they din't adjust the linkage properly, any way in the next few days i would pick it up and drop it in Orange Tx for service.
Alejandro Cantarini
 
Posts: 41
Joined: Wed Dec 12, 2012 10:07 pm

Re: Toe Brake Conversion??

Postby Ray B » Thu Jan 10, 2013 3:26 pm

Tachometers are notorious for reading slow. Mine read 100 RPM low so I replaced it with a new one, the new one read 75 RPM low! Take a portable RPM checker up (or on the ground) and verify the RPM. You may be surprised. (You can probably borrow the checker from your shop or have them do the check.) Ray B
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am

Re: Toe Brake Conversion??

Postby Alejandro Cantarini » Fri Jan 18, 2013 3:38 am

well i have 4 hrs on the Comanche as today and all ready love the hand brake, i guess i was over thinking the all process, the Comanche is getting new paint and new radios soon BTW any one selling a cheap 430 WAAS :mrgreen:

here is a picture of my flying home
Attachments
408398_317623515023770_1519148928_n.jpg
Alejandro Cantarini
 
Posts: 41
Joined: Wed Dec 12, 2012 10:07 pm

Re: Toe Brake Conversion??

Postby N3322G » Fri Jan 18, 2013 12:44 pm

Alejandro,

Always more fun flying it than thinking about stuff you want done. Flew yesterday, great visibility - even got a smooth landing.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 47 guests

cron