I am a new owner and new to the ICS and new to the forum! I am upgrading the avionics and instrument panel in my 260C and would like to replace the throttle quadrant plastic molding. Does anyone have a source for the plastic molding?
Steve Smith
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Interior Plastic
5 posts
• Page 1 of 1
Interior Plastic
by Steve Smith » Wed Jan 26, 2011 1:30 am
- Steve Smith
- ICS member
- Posts: 12
- Joined: Wed Aug 18, 2010 8:51 am
Re: Interior Plastic
by N3322G » Wed Jan 26, 2011 2:12 am
Steve,
Welcome to Comanche ownership.
You might try Plane Plastics at http://www.planeplastics.com/
or a used one from Webco http://www.webcoaircraft.com/
Hope this helps.
Pat
Welcome to Comanche ownership.
You might try Plane Plastics at http://www.planeplastics.com/
or a used one from Webco http://www.webcoaircraft.com/
Hope this helps.
Pat
Pat
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
-
N3322G - ICS member
- Posts: 1911
- Joined: Thu May 08, 2008 1:58 pm
- Location: Fort Worth, Texas area
Re: Interior Plastic
by Kristofer Duckett » Sun Jun 19, 2011 6:38 pm
Hi Steve,
By chance did you replace your plastics? If so who did you use, i have a 63 250 and am looking to replace my plastics aswell.
Kris duckett
By chance did you replace your plastics? If so who did you use, i have a 63 250 and am looking to replace my plastics aswell.
Kris duckett
- Attachments
-
- Kristofer Duckett
- ICS member
- Posts: 98
- Joined: Thu Aug 05, 2010 6:52 am
Re: Interior Plastic
by Charles (David) Miller » Mon Jun 20, 2011 1:11 am
-
Charles (David) Miller - Posts: 25
- Joined: Tue Dec 07, 2010 1:56 am
5 posts
• Page 1 of 1
Return to Maintenance - General
Who is online
Users browsing this forum: No registered users and 49 guests