'Leaky' front strutt

'Leaky' front strutt

Postby Peter Lautensack » Sun Jan 10, 2010 1:43 am

Peter Lautensack
ICS member
ICS member
 
Posts: 9
Joined: Thu Nov 12, 2009 2:44 am

Fwront Strut

Postby Dale Vandever » Sun Jan 10, 2010 1:53 am

User avatar
Dale Vandever
ICS member
ICS member
 
Posts: 169
Joined: Sun Oct 05, 2003 8:41 am

Postby Zach Grant L1011jock » Sun Jan 10, 2010 2:04 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Fwront Strut

Postby Peter Lautensack » Sun Jan 10, 2010 4:54 am

Peter Lautensack
ICS member
ICS member
 
Posts: 9
Joined: Thu Nov 12, 2009 2:44 am

Postby Peter Lautensack » Sun Jan 10, 2010 4:59 am

Peter Lautensack
ICS member
ICS member
 
Posts: 9
Joined: Thu Nov 12, 2009 2:44 am

Postby Hansmeister » Sun Jan 10, 2010 6:10 am

User avatar
Hansmeister
ICS member
ICS member
 
Posts: 802
Joined: Thu Jun 27, 2002 5:44 pm
Location: Kah-li-forn-yah

Postby CLIPCLIP » Sun Jan 10, 2010 12:53 pm

CLIPCLIP
ICS member
ICS member
 
Posts: 97
Joined: Thu Dec 23, 1999 2:06 am
Location: Montreal, Quebec, Canada

Postby Zach Grant L1011jock » Mon Jan 11, 2010 2:09 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby N3322G » Mon Jan 11, 2010 2:26 pm

Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Postby Zach Grant L1011jock » Mon Jan 11, 2010 2:47 pm

Attachments
gear inspection.doc
(67 KiB) Downloaded 120 times
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby N3322G » Mon Jan 11, 2010 3:45 pm

Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Postby Zach Grant L1011jock » Mon Jan 11, 2010 4:38 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby N3322G » Tue Jan 12, 2010 12:29 am

Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Strut cleaning/lubrication after flight

Postby bishopw » Fri Jan 15, 2010 10:01 pm

My mechanic recommends wiping the exposed part of the strut with a very light oil (he likes WD-40) after putting the plane in the hanger to remove grit that lands on the strut during taxiing. He is of the opinion that this will greatly increase the longevity of the o-rings. Is WD-40 too light? Will it leach into the strut oil and cause problems? I've been doing this pretty regularly for the last year...
User avatar
bishopw
ICS member
ICS member
 
Posts: 25
Joined: Wed Mar 31, 2004 4:51 am

Struts

Postby Dale Vandever » Fri Jan 15, 2010 11:29 pm

Wiping the struts down to remove dirt is always a good way to extend the life of the wiper and the o rings.

Most people use hydraulic fluid to wipe the strut as that is the fluid that is inside the strut and you don't have to worry about compatibility.

Dale
User avatar
Dale Vandever
ICS member
ICS member
 
Posts: 169
Joined: Sun Oct 05, 2003 8:41 am

Next

Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 35 guests

cron