Interior

Interior

Postby Chris Elgar_DUP » Sun Nov 16, 2008 4:11 am

Chris Elgar_DUP
ICS member
ICS member
 
Posts: 11
Joined: Wed Oct 22, 2008 10:17 pm

Airtec Interior

Postby Dale Vandever » Sun Nov 16, 2008 3:58 pm

User avatar
Dale Vandever
ICS member
ICS member
 
Posts: 169
Joined: Sun Oct 05, 2003 8:41 am

Postby Zach Grant L1011jock » Sun Nov 16, 2008 4:20 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Interior

Postby Chuck Porter » Thu May 03, 2012 6:09 am

Zach
Where did you get the burn tests done?
Do you have a contact #.
Thanks
Chuck
Chuck Porter
 
Posts: 9
Joined: Fri Nov 05, 2010 3:00 am

Re: Interior

Postby Zach Grant L1011jock » Thu May 03, 2012 2:09 pm

Lots of places do burn testing. Most of the big interior shops will do it for you...BUT...for any aircraft certified under CAR3, there is no burn requirement. Comanches are CAR3 aircraft, so there is no need to do the verticle flame test called for in FAR 23 as in this case it doesnt apply.

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Interior

Postby Kristofer Duckett » Wed Jun 27, 2012 11:15 pm

I completely redid my interrior using Aviations Creations. You remove everything send it to them the refurb seats and send everything back completely redone for you to intsall. Superb process, excellent workmanship and results!

The guys name is Ron Matta. On his website you cane see my interior.

http://aviationscreations.com/

http://www.aviationscreations.com/piperinteriors.htm <----------------------this site shows my front and aft seats 17 from the top, Tan and navy blue.

My two cents, I went with this, Worked great for me. Kris
Kristofer Duckett
ICS member
ICS member
 
Posts: 98
Joined: Thu Aug 05, 2010 6:52 am


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 18 guests

cron