Gear down light

[midlifeflyer]

[MV Case Jr]

[Zach Grant L1011jock]

[Chuck 88P]

[midlifeflyer]

[Zach Grant L1011jock]

[midlifeflyer]

[Andrew Foster]

[Matt Kurke]

Mark:

I didn't read through all the posts so excuse if this is redundant.

If it's only a green light problem I would look at the soldered wire [a lousy method] in the indicator positive position; the center. A quick check, remove the bulb holder and check for voltage at this center position. The ground is another possibility, although less likely.

Matt