Seat rail screws

[md11flyer]

Does anyone know off hand the AN number of the seat rail screws. During the last annual I noticed the screw heads where showing
srew driver slippish wear and I would like to purchase new screws to replace these at next annual.

Thanks,
Gary

[JIMICS2452]

Per the parts manual -
For the singles AN509-10R-18 .
For twins PA30-2 - PA30-901 - AN509-10R-15 on the outboard rails & AN509-10R-17 on the inboard rails.

Could not find the screws for later twins.

[md11flyer]

Thanks Jim. I would suspect that they would be the same in the later models.

Gary

[Don Nelson]

If ordering from Webco, Phil might ask you if your rails are on top the carpet - and if so, how thick is it.
Don

[md11flyer]

Lol, Don... not opening that can of worms again... but I have my rails on the floor boards,
so the standard factory screws should work.

Gary

[Kristin Winter]

They are now MS24694. You might need a couple of different lengths as some go through the stops. IIRC, I use -58 and -60 primarily. Spruce has them.

[md11flyer]

Thanks , Kristin, spruce has them : Cad Plated MS24694-S56 -10R14 29/32 10-32 $0.18 and
Cad Plated MS24694-S58 -10R16 1-1/32 10-32 $0.17
Are these the 2 lenghts you recommend?

Thanks,
Gary

[Kristin Winter]

I recommend S58 and S60.