When my plane is not running the manifold pressure guage reads 1" below ambient pressure. I do not worry about this as it's very consistant.
My question is this. If I want to set 75% power by the POH, would I need to reduce the manifold pressure 1"?
Thank you,
Bill
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Manifold Pressure
4 posts
• Page 1 of 1
Manifold Pressure
by William Mattson » Thu Sep 13, 2012 6:36 pm
- William Mattson
- Posts: 63
- Joined: Sun Nov 06, 2011 7:23 pm
Re: Manifold Pressure
by Zach Grant L1011jock » Thu Sep 13, 2012 6:51 pm
Yes, assuming that your error is constant throughout the entire range.
Zach
Zach
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
Re: Manifold Pressure
by Tom Veatch » Fri Sep 14, 2012 7:29 am
- Tom Veatch
- Posts: 28
- Joined: Wed Sep 28, 2011 7:50 am
- Location: Wichita, Kansas
Re: Manifold Pressure
by Jay » Fri Sep 14, 2012 3:56 pm
If you are based at an airport with a field elevation of 1,000 feet (+/-) then your MP gauge is fine. If you are at sea level, then adjust as Zach suggests.
Jay
Jay
Jay
PA 30 N7702Y
PA 30 N7702Y
-
Jay - ICS member
- Posts: 473
- Joined: Tue Sep 30, 2003 10:59 pm
- Location: Portland, Oregon
4 posts
• Page 1 of 1
Return to Maintenance - General
Who is online
Users browsing this forum: No registered users and 25 guests